Premium 5 Metre Type 2 to CEE Portable EV Charger – 10–32A, 7.2kW – Grey

Premium 5m Type 2 to CEE Portable EV Charging Cable – Grey (10–32A, 7.2kW)

Powerful, portable, and refined for everyday use, this adjustable 10–32A portable EV charger delivers up to 7.2kW via a 32A single-phase CEE socket. Designed for reliable performance in both domestic and professional environments, it’s a practical upgrade from standard 3-pin charging solutions.

At the core is our 3rd-generation control unit, finished in a matte grey housing for a clean, understated look. Rated IP67, the enclosure provides full protection against dust and water ingress, making it suitable for indoor and outdoor use. The responsive touch interface and clear LCD display allow you to select charging current and configure a manual delayed start timer, giving you precise control without relying on external systems.

The premium grey TPU cable is engineered for durability and flexibility, remaining easy to handle across all seasons. It resists UV exposure, abrasion, and impact, ensuring dependable performance whether used at home, in a workshop, or on the move.

Wall-Mounted Cradle & Plug Holder System

A premium addition to the charging kit, the included wall-mounted cradle helps keep your setup organised and protected between uses. It:

• Lifts the control unit safely off the ground

• Allows excess cable to be looped neatly

• Holds the Type 2 plug upright to help minimise moisture ingress

(Some installation required.)

Free Heavy-Duty EV Storage Bag

A tough, weather-resistant carry bag is included at no extra cost, keeping your charger clean, secure, and tangle-free when stored in a vehicle, garage, or workplace. Designed for convenient transport and everyday practicality.

User Manual (Electronic Copy)

A comprehensive electronic user manual is provided, covering charging current selection, touch interface operation, delayed start configuration, LCD display information, and general safety guidance—everything you need to start charging with confidence.

Quick-Start Charging Checklist & Safety Notice

A concise, practical reference designed for daily use. It outlines essential pre-charging checks, correct connection and disconnection order, and key safety precautions, along with important usage warnings to support safe and reliable charging.

• Fully IEC 62196-compliant

• Works with all Type 2 EVs, including: Tesla, BMW, Mercedes-Benz, Audi, Polestar, Kia, Hyundai, Renault, MG, and more

• Connects directly to 32A single-phase CEE sockets (commonly found in workshops, garages, and portable setups)

• Delivers adjustable 10A–32A output (up to 7.2kW AC)

• No hardwiring or wall box required

• Optional wall mount for a fixed but flexible setup

⚠️ Not an extension cable. For direct EV charging only using grounded, compatible outlets.

Precision-built using high-grade components and robotically assembled for perfect consistency, this charger has been tested through 10,000+ charge cycles and backed by a 2-year manufacturer warranty. It’s designed to perform day in, day out, in any environment.

Need help with installation or compatibility? Our friendly UK-based support team is here to assist you before and after your purchase

• UK Shipping via Royal Mail or DHL, with full tracking

• International Shipping via FedEx or Royal Mail (duties/taxes may apply based on location)

• Hassle-Free Returns on unused items

• Dedicated Customer Support for pre- and post-purchase help

UKCA Certified
CE Certified
RoHs Certified
REACh Certified
IEC 62196 Certified
IEC 61851-1 Certified
EN 50620 Certified
IEC 62893 Certified
TÜV Certified

✔ Store the charger in the included bag when not in use
✔ Keep plug covers in place to protect connectors
✔ Let the unit dry completely before reuse if exposed to water
✔ Avoid sharp bends and heavy stacking during storage

Charge Safely—Start with a Simple Check

Your portable CEE EV charger is built with advanced protection features, but a quick visual inspection before use is always a smart move.

⚡ Before You Plug In:

✔ Check Both Connectors
Ensure the Type 2 and CEE ends are clean, dry, and free from damage.

✔ Inspect the Cable
Look for visible wear, cracks, or kinks that may affect performance or safety.

⚠️ Unsure? Don’t Risk It.
If anything doesn’t look right, stop and contact our support team—we’re here to help.

Built-In Safety You Can Rely On

• Leakage Detection – Cuts power instantly if a current imbalance is detected

• Overheat & Overcurrent Protection – Prevents unsafe temperature or current spikes

• Surge & Lightning Defence – Guards your EV and charger against sudden voltage surges

• Voltage Control – Actively manages under- and overvoltage conditions

• CP Fault Monitoring – Ensures reliable communication between charger and EV

• Auto Stop When Full – Charging ends automatically to protect your battery

• Live Alerts on LCD – Real-time data and safety feedback at your fingertips

Every charge starts with safety. Built to protect. Engineered for peace of mind.

Premium TPU Cable – Built to Last

Crafted from premium Thermoplastic Polyurethane (TPU), the cable is:

• Flexible between -30°C and +50°C

• UV and abrasion-resistant

• Rated to withstand 2-tonne impact pressure

• Fully compliant with IEC 62196 standards

• Easy to handle, coil, and store—day after day

Now available in sleek grey—a modern, low-profile alternative to traditional high-visibility colours. It looks great in driveways, blends in with home setups, and hides dirt and scuffs better than yellow or black.

5 Metre Premium Type 2 to CEE Portable EV Charging Cable – 7.2kW (32A Single-Phase, Grey)

High-Powered Portable Charging. Redesigned for Real Life.

The 5m Premium Type 2 to CEE Portable EV Charger delivers powerful, flexible AC charging in a refined, professional format. Designed for EV drivers who need fast, reliable charging without a hardwired wall box, it’s ideal for home CEE sockets, workshops, and mobile use where industrial-grade power is available.

Delivering adjustable 10A to 32A charging (up to 7.2kW) via a 32A single-phase CEE socket, it represents a significant upgrade from standard 3-pin charging—perfect for regular use and faster top-ups at higher current levels.

💎 Refined, Reengineered Design – Premium Grey Finish

At the core is our 3rd-generation control unit, housed in a clean, understated matte grey enclosure. The unit features a button-free, touch-sensitive interface, a clear LCD display, and a fully sealed IP67-rated housing to protect against dust and water ingress.

Built for demanding real-world conditions, the control unit combines modern aesthetics with long-term durability for dependable indoor or outdoor use.

🧲 Wall Mount with Cable & Plug Management

Each premium charger includes a wall-mounted cradle system to keep your setup organised and protected between uses. It:

• Keeps the control unit raised off the ground

• Allows excess cable to be looped neatly

• Holds the Type 2 plug upright to help minimise moisture ingress and extend connector life

(Some installation required for wall mounting.)

🔒 Advanced Safety Features – Built In and Always Active

Engineered for peace of mind, the charger incorporates comprehensive, multi-layer protection systems to safeguard your EV, power supply, and charging equipment:

• Current leakage detection

• Over-current, over-voltage, and under-voltage protection

• CP fault detection

• Surge and lightning protection

• Integrated over-temperature monitoring

• Automatic shut-off when charging is complete

🔌 Effortless Plug-In Charging

Connects directly to any compatible 32A single-phase CEE (Commando) socket—no electrician or fixed installation required. Ideal for:

• High-speed home charging with upgraded electrics

• Workshop and commercial environments

• Campsites, events, and remote or temporary setups

⚙️ Fully Compatible with All Type 2 EVs

Compliant with IEC 62196, this charger is suitable for all Type 2 electric vehicles, including Tesla, BMW, Audi, Mercedes-Benz, Hyundai, Kia, Polestar, Renault, MG, and more.

🌧 Weatherproof. Workshop-Ready. Travel-Tough.

The premium grey TPU cable remains flexible in temperatures from -25°C to +50°C, resists UV exposure and abrasion, and is impact-tested up to 2 tonnes—making it suitable for daily indoor or outdoor use.

• Control unit rated IP67

• Cable and plugs rated IP65

• Screwless, fully sealed Type 2 connector

• Downward-facing plug cover (vehicle side) helps protect paintwork and keep terminals dry

📊 Touch Interface & LCD Display

The backlit display and touch controls provide clear, real-time feedback, including:

• Live charging current

• Internal temperature status

• Fault and safety indicators

• Manual delayed start timer (up to 12 hours) for off-peak or scheduled charging

🧳 What’s in the Box

• 5m Premium Type 2 to CEE Portable Charger (10–32A, 7.2kW)

• Matte grey IP67 control unit with touch interface and LCD display

• Wall-mounted cradle with plug holder and cable loop

• Heavy-duty, weather-resistant storage bag

• Plug cover (pre-installed on vehicle-side connector)

• Electronic User Manual & Quick-Start Charging Checklist & Safety Notice

🛡 Precision Built. Backed by Warranty.

Each unit is robotically assembled and tested through 10,000+ charge cycles, then backed by a 2-year manufacturer warranty for long-term reliability and confidence.

✅ Certified & Compliant

UKCA | CE | TÜV | RoHS
IEC 62196 | IEC 61851-1 | IEC 62893
Manufactured to EN 50620 standards

🧼 Care & Maintenance Tips

• Store in the supplied carry bag when not in use

• Keep plug covers fitted to protect terminals

• Allow the charger to dry fully after exposure to moisture

• Avoid sharp bends or storing under heavy objects

⚙️ Charging Control – Onboard Manual Interface

This charger is designed as a self-contained, standalone charging solution, with all settings managed directly from the onboard control unit. No apps, internet connection, or external control systems are required.

🔘 Manual Operation via Control Unit

To Set Charging Current

• Press and hold the current selection area until the display begins to flash

• Tap to cycle through available current levels (10A–32A)

• Wait a few seconds for the selected setting to confirm automatically

To Set a Start Delay (Optional)

• Tap the delay control to add a delay before charging begins

• Each press increases the delay by 1 hour, up to a maximum of 12 hours

• Wait approximately 3 seconds for the delay setting to lock in

⚠️ If no delay is set, charging will begin automatically once the current level is confirmed and the vehicle is connected.

⚠️ Important Usage Notice

This charger is engineered to operate as a standalone intelligent device. The use of external timers, smart plugs, or third-party scheduling equipment is not recommended, as these can interfere with the charger’s internal control and protection systems.

Damage resulting from the use of external switching or control devices may cause abnormal operation and is not covered under warranty.

This cable is not an extension cable and is intended for direct EV charging only.

For more details, visit our FAQ page.

This charger is considered “smart” because it includes built-in intelligence within the control unit, rather than relying on a fixed wall box or external systems.

Using the onboard touch interface, you can manually select the charging current and set a delayed start of up to 12 hours, allowing charging to begin automatically at a time that suits you—such as overnight or during off-peak electricity periods.

All control is handled directly on the charger itself, offering the convenience of scheduled charging in a simple plug-in CEE format, without apps, internet connectivity, or unnecessary complexity.

Yes — the charger includes a built-in manual delay start timer.

Using the onboard touch interface, you can set a delayed start of up to 12 hours, allowing charging to begin automatically at a time that suits your setup—such as overnight on cheaper electricity or when solar generation is typically available.

Once set, the charger operates independently until charging is complete, giving you simple, set-and-forget scheduling in a fully portable CEE charger—without apps, internet connectivity, or external control devices.

Yes—when used correctly.

• Control unit: IP67 sealed

• Charging connections: IP65 when connected

• Full protection against overheating, overcurrent, voltage issues, leakage and CP faults

For best practice:

• Keep the CEE socket sheltered or water-sealed

• Ensure the plug is fully inserted

• Keep connections off the ground

• Avoid damaged or poorly maintained sockets

Used this way, the charger is built to handle real-world UK weather with confidence.

No—and that’s intentional.

32A and 16A CEE connectors are physically different.
A 32A plug uses larger, thicker pins designed to safely carry higher current. This prevents it from fitting into a 16A socket and avoids unsafe connections.

If you have a 16A CEE outlet, you’ll need a charger specifically designed for 16A CEE use.
This safety standard applies across all brands, not just this charger.