Which EV Charging Cable Do I Need?

🔌 EV Charging Cable Guide for 3.3kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) is equipped with a 3.3kW single-phase AC onboard charger. While slower than most full EVs, this setup is perfectly suited for regular overnight charging and low-mileage electric commuting.

⚙️ Understanding Your 3.3kW Onboard Charger

3.3kW PHEVs typically draw around 14–16 amps from a single-phase AC supply. This provides approximately 11–12 miles of range per hour of charging, depending on your vehicle’s efficiency. A full recharge usually takes 3 to 5 hours for the small battery typical in most PHEVs.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Rated up to 7.4kW — more than your PHEV needs
• Your car will draw 3.3kW at most, so it's fully compatible
• ✅ A smart investment if you plan to upgrade to a full EV later
• ✅ Ideal for use with home wall boxes or public AC points

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.3kW)

• Matches your PHEV’s maximum AC charging capability
• Plugs into a 16A single-phase commando socket
• ✅ Easy to install and a practical alternative to a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower than your PHEV supports — adds ~7–8 miles/hour
• ✅ No installation — just plug into any standard UK wall socket
• ✅ Ideal for overnight top-ups or occasional use

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and the Future?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still only charge at 3.3kW on any AC supply
• ✅ Great for multi-EV households or future upgrades
• ✅ Compatible with all AC public and home chargers

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on typical PHEV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when unplugged
• Portable charger control units rated IP67
• Designed for daily UK and EU weather conditions
• ✅ All products covered by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 3.3kW Onboard AC Chargers

If your electric vehicle is equipped with a 3.3kW single-phase onboard charger, this guide explains how to choose the best charging cable or portable charger based on your driving habits, charging setup, and future upgrade plans.

⚙️ Understanding Your 3.3kW Onboard Charger

A 3.3kW AC onboard charger typically draws 14–16 amps on a single-phase circuit. You can expect to gain around 11–12 miles of range per hour based on an average EV efficiency of 3.5 miles per kWh. Most vehicles with this charging setup will take 6–10 hours to fully charge, depending on battery size.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Fully compatible with 3.3kW AC onboard chargers
• Your EV will draw a maximum of 3.3kW, even if the cable supports 7.4kW
• ✅ A future-proof investment for future EVs with faster charging
• ✅ Ideal for use with home wall boxes or public AC chargers

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.3kW)

• Delivers your EV’s full 3.3kW charging speed
• Plugs into a 16A single-phase commando socket
• ✅ Great for homes without wall boxes
• ✅ Requires basic installation — typically cheaper than a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~7–8 miles of range per hour
• ✅ Fully portable — plug into any UK socket
• ✅ Ideal for overnight charging, low-mileage driving, or as a travel backup

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still only charge at 3.3kW
• ✅ Ideal if you plan to upgrade to a full EV with faster charging
• ✅ Works with all public AC chargers — single- or 3-phase

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on typical EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• Built for UK and EU outdoor use — rain, frost, or shine
• ✅ Covered by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 3.6kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) is equipped with a 3.6kW single-phase onboard charger. While not as fast as full EV systems, this is more than adequate for overnight charging, topping up during the day, and keeping your electric range ready for short trips and commutes.

⚙️ Understanding Your 3.6kW Onboard Charger

A 3.6kW charger typically draws 16 amps from a single-phase AC supply. It adds approximately 12–13 miles of electric-only range per hour (based on average 3.5 mi/kWh efficiency), with a full charge typically completed in 3–5 hours depending on battery size and state of charge.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Rated for up to 7.4kW — more than your vehicle needs
• Your PHEV will draw 3.6kW, making it fully compatible
• ✅ Perfect for home wall boxes and public AC charge points
• ✅ Future-proofed if you upgrade to a faster EV later

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.6kW)

• Delivers your vehicle’s full 3.6kW charge rate
• Plugs into a 16A single-phase commando socket
• ✅ A practical, installation-light alternative to a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Delivers ~7–8 miles of electric range per hour
• ✅ Ideal for overnight top-ups or backup charging
• ✅ No installation required — plugs into any standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 3.6kW — the cable won’t increase speed
• ✅ Future-ready if you add a faster EV to your household
• ✅ Compatible with all AC charging stations — home or public

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• Durable and weatherproof for outdoor UK use
• ✅ 24-month warranty on all cables (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 3.6kW Onboard AC Chargers

If your EV has a 3.6kW onboard charger, it will charge using a single-phase AC supply at a moderate rate — suitable for home setups, overnight charging, and regular daily use. This guide helps you select the right cable or portable charger to get the most from your setup.

⚙️ Understanding Your 3.6kW Onboard Charger

A 3.6kW charger typically draws 16 amps on a single-phase circuit. You can expect to add approximately 12–13 miles of range per hour based on an average efficiency of 3.5 mi/kWh. Most EVs with this charger can be fully charged in 6–9 hours depending on battery size.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Rated for up to 7.4kW — future-proofed for your next EV
• Your vehicle will draw a maximum of 3.6kW
• ✅ Ideal for home wall boxes and public AC charging points

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.6kW)

• Provides full charging speed of 3.6kW
• Plugs into a 16A single-phase commando socket
• ✅ Portable and reliable home charging without a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower charging — ~7–8 miles of range per hour
• ✅ Great for overnight top-ups or backup charging
• ✅ No installation required — just plug into any standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future EVs?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still only charge at 3.6kW
• ✅ Great for households with multiple EVs or future upgrades
• ✅ Compatible with all public AC chargers and home setups

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on typical EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• Built for year-round UK and EU outdoor use
• ✅ Backed by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 3.7kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) is equipped with a 3.7kW AC onboard charger. While not the fastest, it’s perfectly suited to overnight charging and daily low-mileage driving — especially when paired with the right cable or portable charger.

⚙️ Understanding Your 3.7kW Onboard Charger

Most 3.7kW PHEVs draw up to 16 amps from a single-phase AC source. This gives you around 12–13 miles of electric-only range per hour of charging, assuming an average efficiency of 3.5 miles per kWh. A full charge typically takes 3–5 hours depending on the battery size.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Works perfectly with your 3.7kW onboard charger
• Rated up to 7.4kW for future EV compatibility
• ✅ Ideal for home wall boxes or slower public AC chargers

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.7kW)

• Provides your PHEV’s maximum 3.7kW charge rate
• Plugs into a 16A commando socket (can be installed by an electrician)
• ✅ Great for reliable home charging without the cost of a fixed wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~7–8 miles of range per hour
• ✅ No installation required — plug into any standard UK socket
• ✅ Great for low-mileage drivers, overnight charging, or travel

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 3.7kW — this cable doesn’t speed that up
• ✅ Useful if your household also has a faster EV
• ✅ Compatible with all public and private AC chargers

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• Robust and weatherproof for UK and European climates
• ✅ Covered by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 3.7kW Onboard AC Chargers

If your electric vehicle is equipped with a 3.7kW single-phase onboard AC charger, this guide will help you choose the most practical and cost-effective charging cable or portable charger for your needs — whether at home or on the road.

⚙️ Understanding Your 3.7kW Onboard Charger

A 3.7kW AC charger typically draws 16 amps on a single-phase connection. While slower than newer 7.4kW or 11kW systems, it’s still effective for overnight home charging or topping up during the day.

You can expect to gain around 12–13 miles of range per hour based on an average EV efficiency of 3.5 miles per kWh. A full charge will typically take 5–8 hours depending on your battery capacity.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Fully compatible with your EV’s 3.7kW onboard charger
• Your car will only draw 3.7kW, but the cable is future-proof
• ✅ Ideal for home wall boxes or public Type 2 charge points

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 16A Portable Charger with CEE Plug (3.7kW)

• Delivers the full 3.7kW your EV supports
• Plugs into a 16A commando socket — simple and effective
• ✅ Great for home charging without the cost of a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower charging — ~7–8 miles of range per hour
• ✅ Ideal for overnight top-ups or occasional backup use
• ✅ No installation required — just plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and the Future?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still charge at 3.7kW — the cable won’t speed this up
• ✅ Ideal for multi-EV households or those planning to upgrade
• ✅ Works with all AC chargers — public, home, single- or 3-phase

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• Weatherproof and durable for UK and EU conditions
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 6.4kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) is equipped with a 6.4kW AC onboard charger. This allows faster charging than older 3.6kW PHEVs — ideal for drivers who want quicker top-ups and more efficient daily charging at home or on the go.

⚙️ Understanding Your 6.4kW Onboard Charger

Most 6.4kW PHEVs draw just under 28 amps on a single-phase circuit. This enables charging speeds of around 22–23 miles of range per hour based on typical EV efficiency (3.5 mi/kWh). A full charge will typically take between 2 and 3.5 hours depending on battery size and starting charge level.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers up to 7.4kW — your vehicle will draw a maximum of 6.4kW
• Adds approximately ~22 miles of range per hour
• ✅ Fully compatible with home wall boxes and public AC chargers
• ✅ Future-proofed if you upgrade to a faster EV later

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Commando Plug (Up to 7.4kW)

• Plugs into a 32A single-phase commando socket
• Delivers full-speed 6.4kW charging
• Adjustable output: 10A–32A for flexible use
• ✅ Requires minimal installation — a cost-effective wall box alternative

🔗 Shop 32A Portable CEE Chargers

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower, but highly convenient
• Adds ~8 miles of range per hour
• ✅ Ideal as a backup or for overnight top-ups
• ✅ No installation needed — plug into any UK household socket

🔗 Shop 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and the Future?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still only charge at 6.4kW — no added speed benefit
• ✅ Ideal if your household also owns or plans to upgrade to a faster EV
• ✅ Works with all public and home chargers — single or 3-phase

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average efficiency of 3.5 miles per kWh

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• Built for UK and EU outdoor conditions
• ✅ All products backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 6.6kW PHEVs (Single-Phase Onboard Charger)

Your PHEV is equipped with a 6.6kW onboard AC charger. That means:

• On a single-phase home charger or portable unit, you’ll charge at the full 6.6kW rate
• Even if connected to a faster 3-phase charge point, the onboard charger limits charging to 6.6kW

Let’s break down the best charging options based on how and where you typically charge.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers your PHEV’s full 6.6kW charging speed
• Adds ~26 miles of range per hour
• ✅ Perfect for home wall boxes or slower public charge points
• ✅ Cost-effective and fully compatible with your setup

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Commando Plug (Up to 7.4kW)

• Plugs into a 32A commando socket (requires electrician install)
• Delivers full 6.6kW via single-phase
• Adjustable current levels:
  • 10A (2.3kW) ~8 mi/hr
  • 16A (3.7kW) ~13 mi/hr
  • 20A (4.8kW) ~17 mi/hr
  • 24A (5.8kW) ~20 mi/hr
  • 32A (7.4kW) ~26 mi/hr
• ✅ Great for home setups without a fixed charger

🔗 Shop 32A Portable CEE Chargers

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Plugs into any UK socket — no installation needed
• Adds ~8 miles of range per hour
• ✅ Ideal for overnight top-ups or drivers with modest mileage
• ✅ A smart backup or everyday solution if you're not in a rush
• ⚠️ Slower, but effective — ~50 miles added in an overnight session

🔗 Shop 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future EVs?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 6.6kW — no speed benefit
• ✅ Great if you plan to upgrade to a full EV with 11–22kW AC capability
• ✅ Works on all chargers: public, home, single-phase or three-phase

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on typical efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated during charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• All products built for UK and EU weather conditions
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

⚡ Charging Guide for TOGG EVs with 22 kW AC Onboard Chargers

Many TOGG electric vehicles are equipped with a 22 kW AC onboard charger — either as standard or an optional upgrade. This setup allows ultra-fast home and workplace charging when connected to a 32A three-phase AC supply.

At full speed, your TOGG can add up to ~77 miles of range per hour, making AC charging not just convenient, but a serious performance asset for daily driving.

🏡 Maximise Your Home Charging

If your TOGG EV supports 22 kW AC charging and your home has a suitable three-phase 32A wall box, you can take full advantage of your vehicle’s capabilities — ideal for large batteries, high daily mileage, and fast turnarounds.

⚡ 32A 3-Phase Type 2 Charging Cable (22 kW Rated)

• ✅ Delivers full-speed AC charging to compatible TOGG models
• ✅ Works with public and home 3-phase charge points
• ✅ Backward-compatible with single-phase setups (charges at 7.4 kW)
• ✅ Future-proof for mixed-EV households or next-generation TOGG vehicles

🔗 Shop 3-Phase Type 2 Cables

🛠️ Charging on Single-Phase Supply

If your property uses standard single-phase power, your TOGG will still charge effectively — but at a reduced rate of up to 7.4 kW.

🔌 32A Single-Phase Type 2 Charging Cable (7.4 kW)

• ✅ Adds ~26 miles of range per hour
• ✅ Fully compatible with all Type 2 Lexus EVs
• ✅ Practical for overnight home charging

🔗 Shop Single-Phase Type 2 Cables

🔧 Portable Charging Options

Portable chargers are essential for flexibility — perfect for garages, second homes, or public sockets. While they won’t reach 22 kW, they’re excellent for backup and everyday use.

🔌 32A Portable Charger with CEE Plug (Up to 7.4 kW)

• ✅ Plugs into a 32A commando socket (electrician install recommended)
• ✅ Adjustable current (10A–32A)
• ✅ Delivers up to 7.4 kW on single-phase

🔗 Shop 16A Portable EV Chargers with CEE Plug

🔌 10A 3-Pin Portable Charger (2.3 kW)

• ✅ Travel-friendly or emergency backup
• ✅ Adds ~8 miles of range per hour
• ⚠️ Slower speeds — best suited to overnight top-ups

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 TOGG Cable Length Guide

• 3 m: For fixed wall boxes close to the charge port
• 5 m: Most versatile choice for home and public charging
• 7.5–10 m: For wider driveways or offset parking bays
• 15–20 m: Ideal for workplace or commercial use

📈 Charging Summary

*Based on TOGG EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All TOGG-compatible cables are IP65-rated while charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• ✅ Designed for all-season outdoor use
• ✅ 24-month warranty on all charging cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your TOGG based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use fixed cables and do not require or support portable or replaceable charging cables.

🔌 Charging Guide for Leapmotor EVs with 6.6 kW AC Onboard Chargers

Most Leapmotor electric vehicles come equipped with a 6.6 kW single-phase AC onboard charger. This allows for faster charging than older 3.3 kW setups and is ideal for regular home charging, efficient overnight top-ups, and flexible public AC use.

At 6.6 kW, you can expect to add approximately ~26 miles of range per hour — perfect for everyday driving needs.

🏡 Charging at Home with a Wall Box

🔌 32A Single-Phase Type 2 Charging Cable (7.4 kW Rated)

• ✅ Supports your Leapmotor’s full 6.6 kW charge speed
• ✅ Ideal for single-phase home wall box or public AC stations
• ✅ Fully compatible with Leapmotor’s Type 2 connector

🔗 Shop Single-Phase Type 2 Charging Cables

🔧 No Wall Box? Use a Portable Setup

🔌 32A Portable EV Charger with CEE Plug (Up to 7.4 kW)

• ✅ Delivers full 6.6 kW charging on Leapmotor EVs
• ✅ Plugs into a 32A commando socket (installer may be needed)
• ✅ Adjustable from 10A to 32A for flexible use
• ✅ Lower cost alternative to installing a fixed wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup or Emergency Charger?

🔌 10A 3-Pin Portable Charger (2.3 kW)

• ✅ Plugs into any UK 3-pin socket — no installation required
• ✅ Adds ~8 miles of range per hour
• ✅ Perfect as a backup for occasional use or low-mileage driving

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Planning Ahead or Have Other EVs?

🔄 32A 3-Phase Type 2 Charging Cable (22 kW Rated)

• ⚠️ Your Leapmotor EV will still charge at 6.6 kW on single-phase
• ✅ Great for public chargers and future EV upgrades
• ✅ Compatible with all home and public AC charge points

🔗 Shop 3-Phase Type 2 Charging Cables

📈 Charging Summary

*Based on Leapmotor EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated during use; IP55 when unplugged
• Portable chargers include IP67-rated control units
• ✅ Built for year-round UK and EU weather
• ✅ Covered by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Leapmotor based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g., motorway services) use fixed cables and do not require or support portable or replaceable charging cables.

🔌 EV Charging Cable Guide for EVs with 6.6kW Onboard AC Chargers

If your electric vehicle has a 6.6kW AC onboard charger, it supports faster home charging than older 3.3kW or 3.6kW setups — making it ideal for daily top-ups and efficient overnight charges. This guide outlines the best charging cable and portable charger options based on your setup and charging habits.

⚙️ Understanding Your 6.6kW Onboard Charger

A 6.6kW onboard charger typically draws just under 28 amps on a single-phase supply. This delivers around 26 miles of range per hour of charging (based on an average efficiency of 3.5 miles per kWh). A full charge may take 4–6 hours depending on battery size and charge level.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Rated for up to 7.4kW — ideal for your 6.6kW charger
• Delivers near-full speed charging at home or public AC points
• ✅ Compatible now and future-ready if you upgrade EVs

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers your EV’s full 6.6kW charging speed
• Plugs into a 32A single-phase commando socket
• ✅ A more cost-effective alternative to installing a wall box
• ✅ Adjustable output (10A–32A) for flexibility

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Slower, but useful for emergencies or low-mileage drivers
• ✅ No installation required — just plug into a standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still charge at 6.6kW on a single-phase supply
• ✅ Ideal for multi-EV households or if you plan to upgrade
• ✅ Compatible with all public and home AC chargers

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable charger control units are IP67-rated
• Built for UK and European outdoor use
• ✅ 24-month warranty on all charging cables (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 6.8kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) features a 6.8kW onboard AC charger — faster than most traditional hybrids, allowing for quicker top-ups and shorter charging windows. This guide outlines the best charging cable and portable options to suit your setup and future plans.

⚙️ Understanding Your 6.8kW Onboard Charger

A 6.8kW charger typically draws just under 30 amps from a single-phase AC supply. Expect to gain around 26–27 miles of electric-only range per hour of charging, based on typical PHEV efficiency (~3.5 mi/kWh). Most vehicles will fully recharge in 1.5–3.5 hours depending on battery capacity.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Fully supports your PHEV’s 6.8kW charging rate
• Rated up to 7.4kW — gives you full-speed charging on home wall boxes
• ✅ Also compatible with public AC chargers
• ✅ Future-ready if you later upgrade to a full EV

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Provides up to 7.4kW charging — ideal for your 6.8kW PHEV
• Plugs into a 32A single-phase commando socket
• ✅ Adjustable output (10A–32A) — ideal for variable setups
• ✅ Installation is cheaper than a wall box in most cases

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower — adds ~8 miles of range per hour
• ✅ Zero installation — plug into any UK socket
• ✅ Ideal as a secondary charger or for occasional top-ups

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 6.8kW, even on 3-phase setups
• ✅ Compatible with all home and public AC chargers
• ✅ Ideal if your household includes or may add a faster EV

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average PHEV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable charger control units are IP67-rated
• Built for long-term outdoor use in UK weather
• ✅ 24-month warranty on all charging cables (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 7.2kW PHEVs (Single-Phase Onboard Charger)

Your plug-in hybrid electric vehicle (PHEV) includes a 7.2kW single-phase onboard AC charger — the fastest AC charging rate supported by most UK homes. This guide outlines the best cable and portable charger options to help you take full advantage of this capability.

⚙️ Understanding Your 7.2kW Onboard Charger

A 7.2kW AC charger draws the full 32 amps from a single-phase power supply. This delivers up to 25 miles of range per hour (based on an average of 3.5 miles per kWh), with most PHEVs charging fully in under 2.5–3 hours.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers your PHEV’s full 7.2kW charging speed
• ✅ Compatible with all 7.4kW home wall boxes and public AC posts
• ✅ Future-proofed for any faster EV you may own next

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Perfectly matches your PHEV’s onboard charger
• Plugs into a 32A single-phase commando socket
• ✅ Offers full-speed charging without the cost of a fixed wall box
• ✅ Adjustable power settings from 10A to 32A

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower — adds ~8 miles per hour
• ✅ Convenient and fully portable
• ✅ Good for overnight charging or emergency use

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 7.2kW max
• ✅ Great option if your next vehicle supports 3-phase charging
• ✅ Compatible with all public and home AC chargers

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average PHEV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable charger control units are IP67-rated
• Designed for outdoor use in UK weather
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 7.2kW Onboard AC Chargers

Electric vehicles with a 7.2kW single-phase AC onboard charger can take full advantage of the UK’s domestic charging limit — allowing for fast, efficient home and public charging. This guide outlines the best cable and charger options based on your setup, habits, and future needs.

⚙️ Understanding Your 7.2kW Onboard Charger

A 7.2kW AC charger typically draws the full 32 amps on a single-phase circuit. That adds around 25 miles of range per hour (based on 3.5 miles per kWh efficiency). A full charge will generally take 5–8 hours depending on your battery size.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers the full 7.2kW charging speed supported by your EV
• ✅ Compatible with all 7.4kW wall boxes and public AC chargers
• ✅ Ideal for overnight top-ups or full daily charges
• ✅ Future-ready if you switch to a faster EV

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Perfect match for your EV’s 7.2kW onboard charger
• Plugs into a 32A single-phase commando socket
• ✅ Ideal for garages or driveways with limited wall space
• ✅ Offers adjustable current (10A–32A) for flexibility

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Slower than your EV supports — adds ~8 miles per hour
• ✅ Zero installation required — plug into any UK socket
• ✅ Useful for travel, second homes, or as a backup

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still charge at 7.2kW on single-phase
• ✅ Works on both 1-phase and 3-phase public chargers
• ✅ Ideal for EV households, future upgrades, or faster cars

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when unplugged
• Portable chargers feature IP67-rated control units
• ✅ Durable, weatherproof, and UK-tested
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for SEAT Mii Electric (7.2kW Dual-Phase Charging)

The SEAT Mii Electric supports up to 7.2 kW AC charging — delivered uniquely via two phases rather than true 3-phase charging. This allows the car to achieve full-speed charging on certain public and commercial AC charge points, while remaining fully compatible with single-phase setups at home.

⚙️ Understanding the SEAT Mii’s Charging Setup

The onboard charger in the SEAT Mii Electric uses two of the three available phases from a 3-phase supply to deliver up to 7.2 kW. This is a quirk of its platform, shared with the VW e-up! and Skoda Citigoᵉ iV. It does not charge faster on full 3-phase (11 kW or 22 kW) chargers, but it can make use of them at its maximum 7.2 kW rate.

At 7.2 kW, you’ll gain approximately 25 miles of range per hour, with a full charge typically taking 4–5 hours.

🏡 Charging at Home (Single-Phase)

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Perfect match for 7.2 kW charging at home
• ✅ Compatible with all 7.4 kW wall boxes
• ✅ Fully supports the Mii’s charging speed on single-phase
• ✅ Ideal for overnight top-ups and daily use

🔗 Shop Single-Phase Type 2 Cables

🌍 Public Charging or Workplace 3-Phase?

⚡ 32A 3-Phase Type 2 to Type 2 Cable

• ⚠️ The Mii uses only 2 phases to deliver 7.2 kW (not full 11 kW)
• ✅ Still fully compatible with all 3-phase public AC chargers
• ✅ Future-proof for faster EVs that use full 3-phase charging
• ✅ Recommended if you use public charging regularly

🔗 Shop 3-Phase Type 2 Cables

🔧 No Wall Box? Try Portable Charging

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers full-speed charging (7.2 kW) on a single-phase 32A socket
• ✅ Adjustable current (10A–32A) for flexible setups
• ✅ Requires a commando socket — cheaper than a wall box install

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Backup or Travel Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Plug-and-play — use any standard UK socket
• ✅ Ideal for emergencies, travel, or second homes

🔗 Shop 10A 3-Pin Portable EV Chargers

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when unplugged
• Portable chargers feature IP67-rated control units
• ✅ Built for outdoor use year-round in the UK
• ✅ 24-month warranty on all cables (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your SEAT Mii Electric based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for 7.4kW PHEVs (Single-Phase Onboard Charger)

Some modern plug-in hybrid electric vehicles (PHEVs) support 7.4 kW single-phase AC charging — the fastest rate available from a UK domestic supply. If your PHEV includes this capability, you can enjoy significantly reduced charging times at home or public AC points. This guide explains how to get the most out of your setup with the right cable or charger.

⚙️ Understanding Your 7.4kW Onboard Charger

At 7.4 kW, your PHEV will draw 32 amps from a single-phase AC circuit. This delivers up to 26 miles of electric-only range per hour of charging (based on typical PHEV efficiency of 3.5 miles per kWh). Most batteries will charge fully in 1.5–3 hours, depending on capacity.

🏡 Charging at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers your PHEV’s full 7.4 kW charging speed
• ✅ Works with all compatible home wall boxes
• ✅ Fully supports future EV upgrades
• ✅ Plug into any Type 2 AC socket at public chargers too

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Provides full-speed charging when plugged into a 32A commando socket
• ✅ Adjustable current settings (10A–32A)
• ✅ Requires a basic installation — cheaper than a full wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Simple Backup Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour — slower, but reliable
• ✅ Great for overnight use or emergencies
• ✅ Completely portable — plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Future EVs Too?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your PHEV will still charge at 7.4 kW (single-phase limit)
• ✅ Compatible with all AC charge points — public or home
• ✅ Recommended for mixed-EV households or future upgrades

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on typical PHEV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• ✅ Built for UK weather — all-season reliability
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your PHEV based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 7.4kW Onboard AC Chargers

If your electric vehicle includes a 7.4 kW onboard single-phase AC charger, you're already using the highest power level typically supported on UK domestic supplies. This guide helps you choose the right charging cable or portable charger to match your setup, habits, and future needs.

⚙️ Understanding Your 7.4kW Onboard Charger

A 7.4 kW charger draws the full 32 amps on a single-phase circuit. This adds approximately 26 miles of range per hour of charging (based on an average of 3.5 miles per kWh). Full charging times depend on battery size but typically range from 4 to 8 hours.

🏡 Charging at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers the full 7.4 kW charge your EV supports
• ✅ Compatible with all single-phase 7.4 kW wall boxes
• ✅ Also works at public AC chargers with Type 2 sockets
• ✅ Ideal for daily or overnight top-ups

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Full-speed charging using a 32A commando socket
• ✅ Adjustable current settings: 10A–32A
• ✅ More cost-effective than installing a wall box
• ✅ Ideal for garages, outbuildings, or rented homes

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup or Travel Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Plug into any standard UK socket
• ✅ Ideal for low-mileage users or charging overnight
• ✅ Lightweight, portable, and zero installation required

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and Future Vehicles?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ Your EV will still charge at 7.4 kW (single-phase limit)
• ✅ Works with both 1-phase and 3-phase public chargers
• ✅ Ideal for multi-EV households or future vehicle upgrades

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when unplugged
• Portable charger control units are IP67-rated
• ✅ Built for year-round outdoor use in UK weather
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your EV based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for the BYD Han (7.4kW AC Onboard Charger)

The BYD Han supports up to 7.4 kW AC charging via its onboard single-phase charger — the highest AC charging rate typically available from UK home supplies. This guide outlines the best cable and charger options to ensure you get the most out of your setup, whether at home, at work, or on the move.

⚙️ Understanding the BYD Han’s Charging Capability

With a 7.4 kW AC charger, the Han draws 32 amps on a single-phase connection. This delivers approximately 26 miles of range per hour (based on 3.5 miles per kWh efficiency). A full recharge typically takes 6–8 hours, depending on your driving needs and battery state of charge.

🏡 Charging at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Perfectly matches the Han’s onboard AC charging rate
• ✅ Compatible with all 7.4 kW wall boxes and public AC charge points
• ✅ Future-proofed for other Type 2 EVs
• ✅ Ideal for overnight or daily home charging

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers up to 7.4 kW via a 32A single-phase commando socket
• ✅ Adjustable output — perfect for flexible installations
• ✅ Requires a commando socket installed by a qualified electrician
• ✅ Cost-effective alternative to a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Travelling or Need a Backup?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour — best for overnight top-ups
• ✅ Plug into any standard UK socket
• ✅ Ideal for emergencies, travel, or charging at a second property

🔗 Shop 10A 3-Pin Portable EV Chargers

🔁 Want to Future-Proof for Faster EVs?

🔄 32A 3-Phase Type 2 Cable (22kW Rated)

• ⚠️ The BYD Han will still charge at 7.4 kW (single-phase limit)
• ✅ Compatible with both single- and three-phase public chargers
• ✅ A great long-term investment for multi-EV households

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• ✅ Designed for all-season outdoor use in UK weather
• ✅ 24-month warranty on all charging cables (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your BYD Han based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for EVs with 11kW Onboard AC Chargers

Electric vehicles with an 11 kW AC onboard charger can take advantage of fast charging speeds when connected to a 3-phase power supply — typically found at workplaces or public charge points. This guide helps you match your EV to the best cable for home and public use, with future flexibility in mind.

⚙️ Understanding Your 11kW Onboard Charger

An 11 kW onboard charger uses a 3-phase 16A connection to achieve its full charging speed. This adds up to 38 miles of range per hour (based on 3.5 miles per kWh efficiency). To charge at this speed at home, you’ll need a compatible 3-phase wall box and supply.

If only connected to a single-phase (7.4 kW) outlet, your EV will still charge — but at a reduced speed of around 26 miles per hour.

🌍 Use Home & Public Chargers?

⚡ 32A 3-Phase Type 2 to Type 2 Cable (22kW Rated)

• Fully supports 11 kW 3-phase AC charging
• ✅ Works at public and workplace chargers with 3-phase output
• ✅ Compatible with your home setup if 3-phase is installed
• ✅ Can also be used on single-phase chargers at reduced speed

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging on Single-Phase at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable (7.4kW)

• Provides ~26 miles of range per hour at home
• ✅ Compatible with all UK single-phase wall boxes
• ⚠️ Will charge your 11 kW EV at reduced speed
• ✅ Still a reliable and cost-effective option

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers full single-phase charging (up to 7.4 kW)
• ✅ Plug into a 32A commando socket (installed by electrician)
• ✅ Portable and adjustable — suitable for garage setups or semi-permanent installs
• ⚠️ Like all single-phase options, speed is limited to ~26 miles/hr

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Emergency or Travel Charging?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ No installation needed — plug into any standard UK socket
• ✅ Ideal for overnight use, holiday homes, or workplace top-ups

🔗 Shop 10A 3-Pin Portable EV Chargers

📈 Charging Summary

*Based on typical EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• IP65-rated while charging; IP55 when unplugged
• Portable chargers feature IP67-rated control units
• ✅ Designed for outdoor UK use in all seasons
• ✅ Backed by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your vehicle based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Abarth EVs (11kW AC Onboard Charger)

Your Abarth EV is equipped with an 11kW onboard AC charger. That means:

• On a standard UK single-phase home charger, you'll charge at up to 7.4kW
• On a public or 3-phase supply, you can unlock the full 11kW charging speed

Let’s break down the best charging cable options for your setup, usage, and future plans.

🏡 Charging Mostly at Home?

🔌 32A Single-Phase Type 2 to Type 2 Cable

• Delivers up to 7.4kW charging speed
• Adds ~26 miles of range per hour
• ✅ Simple, cost-effective, and fully compatible with your Abarth
• ✅ Ideal if you don’t often use public chargers

💡 Your onboard charger supports 11kW, but you’ll only reach that speed if connected to a 3-phase supply — like those found at public or workplace chargers.

🔗 Shop Single-Phase Type 2 Cables

🌍 Mix of Home & Public Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Cable

• Unlocks full 11kW charging speed on 3-phase
• Adds up to ~38 miles of range per hour
• ✅ Works on both single-phase and three-phase chargers
• ✅ Great for commuting, road trips, and fast top-ups

💡 This is the most flexible and future-proof option — it works now, and likely works with your next EV too.

🔗 Shop 3-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Commando Plug (Up to 7.4kW)

• Plugs into a 32A commando socket (requires electrician install)
• Adjustable charging speeds:
  • 10A (2.3kW) ~8 mi/hr
  • 16A (3.7kW) ~13 mi/hr
  • 20A (4.8kW) ~17 mi/hr
  • 24A (5.8kW) ~20 mi/hr
  • 32A (7.4kW) ~26 mi/hr
• ✅ Portable, powerful, and installation-light
• ✅ Great for garages, outbuildings, or semi-permanent setups

💡 Best for those who want strong charging at home without committing to a fixed wall box.

🔗 Shop 32A Portable CEE Chargers

🧳 Prefer Plug-and-Play Simplicity?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Plugs into any standard UK socket
• Adds ~8 miles of range per hour
• ✅ Completely portable, with zero installation required
• ✅ Ideal for drivers with lower daily mileage or overnight top-ups
• ✅ A smart solution for renters, second vehicles, or low-use EVs
• 🧠 Many use this as their primary charger, not just a backup

⚠️ Slower than other options, but can still cover 50–60 miles of overnight charging.

🔗 Shop 3-Pin Portable EV Chargers

🔁 Want One Cable for Now and the Future?

🔄 32A 3-Phase Type 2 Cable

• ✅ Works on all chargers — home, public, single-phase, or three-phase
• ✅ Delivers full 11kW when available
• ✅ Compatible with future EVs or second EVs in the household

💡 If you ever change EV or start using public chargers more, you’re already covered.

🔗 Shop 3-Phase Type 2 Cables

📈 Charging Summary

*Based on average efficiency of 3.5 miles per kWh

🛡️ Safety & Warranty

• IP65-rated during charging; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• Designed for year-round outdoor use in UK and European climates
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to estimate charging times for your Abarth — or contact our team for expert advice. We’re happy to help you choose the best setup for your lifestyle.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Aiways EVs (11kW AC Onboard Charger)

Aiways electric vehicles, including the Aiways U5, come equipped with an 11 kW AC onboard charger — enabling fast and efficient home or public charging when paired with the right cable and setup. Whether you're charging from a home wall box, public AC point, or looking for a portable backup, this guide helps Aiways owners choose the ideal cable for their needs.

⚙️ Understanding Your Aiways AC Charging Setup

The 11 kW charger in your Aiways EV uses a 3-phase 16A connection. When connected to a compatible 3-phase supply, your Aiways can add up to ~38 miles of range per hour (based on average EV efficiency of 3.5 miles/kWh).

Charging on a standard single-phase home wall box will still work, but at a reduced rate of up to 7.4 kW — delivering around 26 miles of range per hour.

⚡ Best Option for Full-Speed Charging

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks the full 11 kW charging speed supported by Aiways EVs
• ✅ Compatible with public charging networks and 3-phase home setups
• ✅ Also works on single-phase chargers (at reduced speed)
• ✅ Ideal for future-proofing if your next EV charges even faster

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Aiways EV at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for single-phase wall boxes commonly installed in UK homes
• ✅ Compatible with your Aiways EV — charges at 7.4 kW
• ✅ Compact and cost-effective solution for daily charging

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box? Consider a Portable Option

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Offers up to 7.4 kW when plugged into a 32A commando socket
• ✅ Adjustable current (10A–32A) for greater flexibility
• ✅ Suitable for garages, outbuildings, or semi-permanent setups
• ⚠️ Aiways will charge at single-phase speed with this setup

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Emergency or Travel Use

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Plug into any standard UK socket
• ✅ Ideal for backup use or low-mileage overnight charging

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Cable Lengths — What Do You Need?

Aiways owners can choose from multiple cable lengths depending on where and how they charge:

• 3 m: Very short runs — ideal for fixed wall box installs with charger next to the charge port
• 5 m: Most common choice — suits most driveways and public setups
• 7.5 m: Extra flexibility — helpful when reversing into bays or dealing with tight spaces
• 10 m: Longer runs — works well across larger driveways or when parking can't be guaranteed near the charger
• 15–20 m: Extended reach — suitable for commercial setups, fleet vehicles, or shared parking areas

📈 Charging Summary

*Based on typical EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Aiways-compatible cables are IP65-rated during use (IP55 when unplugged)
• Portable charger control boxes are IP67-rated
• ✅ Designed for UK conditions — durable, weather-resistant, and long-lasting
• ✅ Covered by a 24-month warranty (excludes accessories like carry straps and cases)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Aiways EV based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Alfa Romeo EVs (11kW AC Onboard Charger)

Alfa Romeo’s fully electric models are equipped with an 11 kW AC onboard charger, giving drivers access to fast, efficient charging when connected to a 3-phase power source. Whether you're charging your Alfa Romeo at home or using public charge points, this guide helps you choose the ideal cable for speed, convenience, and future flexibility.

⚙️ Understanding Alfa Romeo's 11kW Charging Setup

Alfa Romeo EVs with 11 kW charging use a 3-phase 16A AC supply to achieve full speed — adding up to ~38 miles of range per hour (based on 3.5 miles per kWh efficiency). At home, if you're using a single-phase wall box (typical in UK properties), your Alfa Romeo will charge at a reduced speed of up to 7.4 kW, or around 26 miles of range per hour.

⚡ Want to Unlock Full 11kW Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Enables your Alfa Romeo EV to charge at full 11 kW when connected to a 3-phase source
• ✅ Compatible with public AC chargers and 3-phase home wall boxes
• ✅ Works on single-phase setups too — auto-adapts to available power
• ✅ Ideal for commuting, longer trips, and future EV compatibility

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Alfa Romeo at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect match for standard UK home wall boxes
• ✅ Delivers up to 7.4 kW to your Alfa Romeo — enough for overnight charging
• ✅ Lightweight and simple for everyday home or public use

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Plugs into a 32A commando socket — full single-phase charging speed
• ✅ Offers adjustable charging (10A to 32A)
• ✅ Portable, flexible, and often cheaper than a full wall box install
• ⚠️ Charges your Alfa Romeo at single-phase speed (up to 7.4 kW)

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Travel or Backup Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour — slower, but flexible
• ✅ Ideal for overnight top-ups, second homes, or workplace sockets
• ✅ No installation required — plug into any standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

We offer a range of cable lengths to suit your Alfa Romeo charging setup:

• 3 m: Compact setups — when charger and port are side by side
• 5 m: Standard length for most home and public use
• 7.5 m: Added flexibility — good for rear charge ports or angled parking
• 10 m: Ideal if you can’t always park close to the charger
• 15 m & 20 m: Best for shared parking, long driveways, or commercial use

📈 Charging Summary

*Based on average EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Alfa Romeo-compatible cables are IP65-rated during use (IP55 when unplugged)
• Portable charger control units are IP67-rated
• ✅ Built for UK outdoor use — year-round durability
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Alfa Romeo based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Alpine EVs (11kW AC Onboard Charger)

Alpine’s all-electric models feature an 11 kW AC onboard charger, allowing drivers to take full advantage of faster AC charging — both at home and on the road. Whether you’re charging your Alpine at a public station or setting up a home solution, this guide breaks down the best cable options to match your Alpine’s charging potential.

⚙️ Understanding Alpine’s 11kW Charging Setup

With an 11 kW AC charger, Alpine EVs use a 3-phase 16A supply to reach full speed — adding approximately 38 miles of range per hour (based on 3.5 miles per kWh efficiency).

If you’re charging from a typical single-phase wall box at home, your Alpine EV will still charge at up to 7.4 kW, delivering around 26 miles per hour.

⚡ Charging at Full Speed (3-Phase)

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks the full 11 kW charging rate of your Alpine EV
• ✅ Ideal for public charging stations and 3-phase home setups
• ✅ Future-proofed for faster EVs — supports up to 22 kW
• ✅ Compatible with single-phase chargers at reduced speed

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Alpine at Home (Single-Phase)

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for homes with standard single-phase wall boxes
• ✅ Charges your Alpine at up to 7.4 kW — ideal for overnight use
• ✅ Lightweight, cost-effective, and widely compatible

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Home Charging Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Provides up to 7.4 kW single-phase charging via 32A commando socket
• ✅ Adjustable amp settings from 10A to 32A
• ✅ Flexible alternative to installing a fixed wall box
• ⚠️ Your Alpine will charge at single-phase speed with this solution

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Travelling with Your Alpine or Need a Backup?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds around 8 miles of range per hour of charging
• ✅ Plug into any standard UK household socket
• ✅ Great for emergencies, overnight use, or second properties

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Should You Choose?

We stock a full range of cable lengths to suit all Alpine charging setups:

• 3 m: Perfect for fixed home wall boxes next to the charge port
• 5 m: Most popular — ideal for standard driveway use
• 7.5 m: Adds flexibility for longer vehicles or awkward parking positions
• 10 m: Great for when the charger and charge port are not close together
• 15–20 m: Extended length — suitable for public chargers, shared spaces, or commercial sites

📈 Charging Summary

*Based on average Alpine EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Alpine-compatible cables are IP65-rated while charging; IP55 when unplugged
• Portable charger control units are IP67-rated
• ✅ Designed for tough UK weather and regular outdoor use
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Alpine based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Audi EVs (11kW AC Onboard Charger)

Many Audi electric vehicles, including several e-tron and Q-series models, come with an 11 kW AC onboard charger. This allows your Audi to charge quickly when connected to the right AC supply — especially at home or public charge points. This guide helps Audi drivers choose the most suitable charging cable for their home setup, travel needs, and future plans.

⚙️ Understanding Audi's 11kW Charging System

With an 11 kW AC onboard charger, your Audi EV can draw power from a 3-phase 16A supply. This enables charging at up to ~38 miles of range per hour (based on 3.5 miles per kWh). If you’re using a standard single-phase wall box, your Audi will still charge — but at a reduced rate of 7.4 kW, or about 26 miles per hour.

⚡ Want Full-Speed Charging for Your Audi?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks the full 11 kW AC speed supported by Audi EVs
• ✅ Compatible with 3-phase home supplies and public AC chargers
• ✅ Backwards-compatible with single-phase outlets
• ✅ Future-proofed if you upgrade to a faster EV

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Audi at Home (Single-Phase)

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Best choice for UK homes with standard single-phase wall boxes
• ✅ Charges your Audi at up to 7.4 kW (approx. 26 miles/hour)
• ✅ Lightweight and convenient for daily use

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box? Use a Portable Charging Solution

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers full-speed single-phase charging (up to 7.4 kW)
• ✅ Adjustable between 10A and 32A
• ✅ Requires a commando socket installed by a qualified electrician
• ✅ Portable and cost-effective — great alternative to a wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Travelling with Your Audi or Need a Backup?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds around 8 miles of range per hour of charging
• ✅ Plug into any regular UK socket
• ✅ Ideal for holiday homes, overnight charging, or backup use

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Length Cable Should You Choose?

We offer a full range of cable lengths to suit all Audi charging situations:

• 3 m: Best for wall boxes located directly beside the charge port
• 5 m: Most popular — suitable for most home and public use
• 7.5 m: Useful for longer vehicles or tight parking layouts
• 10 m: Helpful if you can’t park close to the charger
• 15–20 m: Ideal for commercial, fleet, or shared-use settings

📈 Charging Summary

*Based on average Audi EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Audi-compatible cables are IP65-rated while charging, IP55 when unplugged
• Portable chargers feature IP67-rated control units
• ✅ Designed for year-round UK weather
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Audi based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for BMW EVs (11kW AC Onboard Charger)

Many BMW electric vehicles, including the i4, iX3, and select iX and iX1 models, are equipped with an 11 kW AC onboard charger. This allows for fast, reliable charging when connected to the right AC supply — both at home and at public charging points. This guide helps BMW drivers choose the best charging cable for their setup, usage habits, and long-term plans.

⚙️ Understanding BMW’s 11kW Charging Capability

BMW EVs with 11 kW AC charging use a 3-phase 16A connection to charge at full speed — delivering around 38 miles of range per hour (based on 3.5 miles/kWh). If you connect to a single-phase wall box at home, charging will be limited to 7.4 kW — or about 26 miles per hour.

⚡ Charge at Full 11kW Speed?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Fully supports 11 kW AC charging for your BMW
• ✅ Works with public 3-phase chargers and 3-phase home wall boxes
• ✅ Also compatible with single-phase setups (auto adjusts speed)
• ✅ Future-proof for next-generation BMW EVs

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your BMW at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for UK homes with single-phase wall boxes
• ✅ Charges your BMW at up to 7.4 kW (around 26 miles/hour)
• ✅ Lightweight and simple to use — ideal for everyday home charging

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers full single-phase speed — up to 7.4 kW for your BMW
• ✅ Adjustable amps (10A–32A) for flexible setup
• ✅ Connects to a 32A commando socket (installation required)
• ✅ A cost-effective and portable alternative to a fixed wall box

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Portable Backup for Travel?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds approximately 8 miles of range per hour
• ✅ Plugs into any UK 3-pin household socket
• ✅ Ideal for overnight top-ups or as a backup on long journeys

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Do You Need?

BMW drivers have different charging needs — we offer these lengths:

• 3 m: Best for home wall boxes directly next to the charge port
• 5 m: The most popular size — suits most home and public use
• 7.5 m: Extra reach for tight parking or rear charge ports
• 10 m: Great when parking distance from the charger varies
• 15–20 m: Suitable for shared parking, fleet, or commercial setups

📈 Charging Summary

*Based on typical BMW EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• BMW-compatible cables are IP65-rated when charging; IP55 when unplugged
• Portable chargers feature IP67-rated control boxes
• ✅ Built for UK weather conditions — tested and robust
• ✅ Covered by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your BMW based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for BYD EVs (11kW AC Onboard Charger)

BYD electric vehicles such as the Atto 3 and Dolphin support 11 kW AC charging, making them well-suited for home and public charging on both single- and 3-phase supplies. To charge your BYD safely and efficiently, you’ll need the right cable for your setup — this guide breaks down the best options for every scenario.

⚙️ Understanding BYD’s 11kW Charging Capability

BYD EVs with 11 kW onboard chargers use a 3-phase 16A supply to reach full AC charging speed — delivering around 38 miles of range per hour (based on 3.5 miles/kWh). When using a standard single-phase home wall box, charging speed is capped at 7.4 kW — adding roughly 26 miles per hour.

⚡ Charging at Full Speed on 3-Phase

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks your BYD’s full 11 kW AC charging speed
• ✅ Compatible with public charge points and 3-phase home supplies
• ✅ Works on single-phase supplies at reduced speed
• ✅ Ideal for public charging or future-proofing your next EV

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging a BYD at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for UK homes with standard single-phase wall boxes
• ✅ Charges your BYD at up to 7.4 kW — suitable for overnight charging
• ✅ Lightweight and easy to use

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed Yet?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Delivers up to 7.4 kW charging via a 32A commando socket
• ✅ Adjustable current settings (10A–32A)
• ✅ Portable and cost-effective alternative to fixed wall boxes
• ⚠️ Your BYD will charge at single-phase speed with this setup

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need Backup or Travel Charging?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Charges at around 2.3 kW — adds ~8 miles per hour
• ✅ Compatible with any UK household socket
• ✅ Ideal for occasional, emergency, or travel use

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Cable Lengths — What's Best for Your BYD?

Choose a cable length that suits your parking habits and charge point position:

• 3 m: Compact setups with charge port near wall box
• 5 m: Standard option for home and public use
• 7.5 m: Useful if you often park rear-in or at an angle
• 10 m: Flexible for wider driveways or limited access
• 15–20 m: Best for shared bays, fleet setups, or public sites

📈 Charging Summary

*Based on BYD EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All BYD-compatible cables are IP65-rated while in use (IP55 when unplugged)
• Portable charger control units are IP67-rated
• ✅ Suitable for UK year-round outdoor use
• ✅ Includes 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your BYD based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Citroën EVs (11kW AC Onboard Charger)

Certain Citroën electric vehicles — including select ë-C4 and ë-Berlingo models — are equipped with an 11 kW AC onboard charger. This means they can charge quickly at compatible home or public charging stations. This guide helps you choose the right cable for your Citroën based on your setup, habits, and future charging needs.

⚙️ Understanding Citroën’s 11kW Charging Capability

Citroën EVs with an 11 kW AC charger are designed to use a 3-phase 16A power supply for full-speed charging — adding up to ~38 miles of range per hour (based on 3.5 miles per kWh).

If you’re using a typical single-phase home wall box, your Citroën will charge at up to 7.4 kW, which equates to about 26 miles per hour.

⚡ Charging at Full Speed (3-Phase Supply)

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Enables full 11 kW charging speed on public or 3-phase home setups
• ✅ Works with both 3-phase and single-phase charge points
• ✅ A future-proof solution for any next-generation Citroën EV

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Citroën at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Ideal for standard UK home installations using a single-phase wall box
• ✅ Delivers up to 7.4 kW — enough for overnight charging
• ✅ Compact, convenient, and reliable for daily use

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box? Use a Portable Charging Option

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — charges up to 7.4 kW
• ✅ Offers adjustable amps (10A–32A) for flexibility
• ✅ More affordable than installing a wall box
• ⚠️ Charges at single-phase speed, even though your Citroën supports 3-phase

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup for Travel or Emergencies?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Plug into any standard UK household socket
• ✅ Lightweight and highly portable — great for travel or backup use

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

We offer a full range of cable lengths to fit your Citroën charging routine:

• 3 m: Very short runs — ideal for chargers installed right next to the charge port
• 5 m: The most popular choice for everyday home or public charging
• 7.5 m: Offers flexibility for awkward parking angles
• 10 m: Great for larger driveways or inconsistent parking positions
• 15–20 m: Extended reach — best for shared bays or commercial setups

📈 Charging Summary

*Based on average Citroën EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Citroën-compatible cables are IP65-rated during charging; IP55 when unplugged
• Portable charger control boxes are IP67-rated
• ✅ Designed for year-round outdoor use in the UK and Europe
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Citroën based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Cupra EVs (11kW AC Onboard Charger)

Cupra electric vehicles such as the Cupra Born are equipped with an 11 kW AC onboard charger. This allows your Cupra to charge efficiently both at home and on public AC charge points. The guide below outlines the best cable options based on how and where you plan to charge your Cupra — at home, on the move, or in the future.

⚙️ Understanding Cupra’s 11kW Charging Capability

With a 3-phase 11 kW AC charger, your Cupra can add around 38 miles of range per hour when connected to a compatible 3-phase supply (based on 3.5 miles per kWh). On a standard UK single-phase home wall box, you’ll still charge at up to 7.4 kW, or roughly 26 miles per hour.

⚡ Maximise Charging Speed (3-Phase)

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Enables full-speed 11 kW charging on 3-phase public or home supplies
• ✅ Works with single-phase too — auto-adjusts output
• ✅ Ideal for mixed-use setups or if you plan to upgrade your home charger later

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Cupra at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Designed for homes with a standard single-phase wall box
• ✅ Charges your Cupra Born at up to 7.4 kW
• ✅ Lightweight, flexible, and ideal for regular use

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket for high-speed single-phase charging
• ✅ Adjustable amps from 10A to 32A
• ✅ Suitable for garages, outbuildings, or those without a wall box
• ⚠️ Will charge your Cupra at single-phase speed (not full 11 kW)

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup Charger?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour of charging
• ✅ Ideal for overnight charging or use while travelling
• ✅ No installation needed — plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

Cupra drivers often need different lengths depending on parking setup:

• 3 m: For home chargers close to the car’s port
• 5 m: Most common size — great for general home or public use
• 7.5 m: Helps reach rear ports or parked-at-angle bays
• 10 m: Perfect for wider driveways or irregular spaces
• 15–20 m: Designed for shared spaces or commercial parking

📈 Charging Summary

*Based on Cupra EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Cupra-compatible cables are IP65-rated while in use (IP55 unplugged)
• Portable chargers include IP67-rated control units
• ✅ Designed for long-term outdoor use in UK weather
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Cupra based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for DS EVs (11kW AC Onboard Charger)

DS electric vehicles such as the DS 3 E-Tense are equipped with an 11 kW AC onboard charger. This means you can benefit from fast charging at compatible home or public AC charging stations. This guide helps you choose the best cable setup for charging your DS efficiently — now and in the future.

⚙️ Understanding DS’s 11kW Charging Capability

When connected to a 3-phase 16A AC supply, your DS can charge at up to 11 kW — adding approximately 38 miles of range per hour (based on 3.5 miles per kWh).

If you’re charging at home using a single-phase wall box, your DS will charge at up to 7.4 kW, or around 26 miles per hour.

⚡ Charging at Full Speed (Public or 3-Phase)

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Delivers full 11 kW charging for your DS on 3-phase supply
• ✅ Compatible with public charge points and 3-phase home setups
• ✅ Works with single-phase outlets at reduced speed
• ✅ Ideal for future-proofing — supports up to 22 kW if you upgrade EVs

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging a DS at Home (Single-Phase)

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for standard UK home wall boxes
• ✅ Charges your DS at up to 7.4 kW
• ✅ Ideal for overnight or daily top-up charging

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — adjustable from 10A to 32A
• ✅ Great for those who want charging flexibility without a fixed installation
• ⚠️ Charges your DS at single-phase speed

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Portable Backup Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Delivers ~8 miles of range per hour
• ✅ Ideal for overnight charging or use while travelling
• ✅ No installation required — plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Do You Need?

We offer multiple cable lengths to match your home or public charging routine:

• 3 m: Best for tight setups with wall box next to charge port
• 5 m: Most popular — ideal for home and public use
• 7.5 m: Adds flexibility for awkward parking arrangements
• 10 m: Great for longer driveways or restricted access
• 15–20 m: Extended reach — perfect for commercial or shared bays

📈 Charging Summary

*Based on DS EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All DS-compatible cables are IP65-rated during use; IP55 when unplugged
• Portable chargers feature IP67-rated control units
• ✅ Built for UK weather and everyday outdoor use
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your DS based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Elaris EVs (11kW AC Onboard Charger)

Many Elaris electric vehicles, including models like the Elaris Finn and Leo, feature an 11 kW AC onboard charger. This allows your Elaris to charge efficiently at home or public AC charging stations. This guide helps you select the most suitable cable for your setup, charging habits, and future needs.

⚙️ Understanding Elaris’s 11kW Charging Capability

When connected to a 3-phase 16A AC supply, your Elaris EV can charge at the full 11 kW rate — adding approximately 38 miles of range per hour (based on 3.5 miles per kWh). At home, if you're using a single-phase wall box, the charge rate will be capped at 7.4 kW, or roughly 26 miles per hour.

⚡ Want Full-Speed Charging for Your Elaris?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks your Elaris EV’s full 11 kW charging speed on 3-phase supply
• ✅ Compatible with public and 3-phase home wall boxes
• ✅ Also works with single-phase charging points (at reduced speed)
• ✅ Future-proofed for faster EVs or second vehicles

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Elaris at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Designed for UK homes with single-phase wall boxes
• ✅ Charges your Elaris at up to 7.4 kW
• ✅ Lightweight, easy to use, and perfect for daily home use

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — adjustable from 10A to 32A
• ✅ Delivers up to 7.4 kW charging speed for your Elaris
• ✅ Great alternative to fixed wall boxes
• ⚠️ Charges at single-phase speed only

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup for Travel or Emergencies?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds about 8 miles of range per hour
• ✅ Ideal for overnight charging or travel use
• ✅ No installation — just plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Do You Need?

We offer cable lengths to suit every Elaris charging environment:

• 3 m: Great for wall boxes close to the charge port
• 5 m: Most common — works for typical home and public charging
• 7.5 m: Helpful when you park in different directions
• 10 m: For wide driveways or larger parking bays
• 15–20 m: Ideal for commercial, shared or fleet use

📈 Charging Summary

*Based on typical Elaris EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Elaris-compatible cables are IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• ✅ Designed for UK weather and outdoor use
• ✅ Backed by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Elaris based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Fiat EVs (11kW AC Onboard Charger)

Fiat electric vehicles, including the popular Fiat 500e, are equipped with an 11 kW AC onboard charger. This allows for efficient charging at home or at public charging stations, depending on the cable and power supply used. The guide below helps Fiat owners choose the best cable for their driving and charging setup.

⚙️ Understanding Fiat’s 11kW Charging Capability

To achieve the full 11 kW charging speed, your Fiat must be connected to a 3-phase 16A supply. This delivers around 38 miles of range per hour (based on 3.5 miles per kWh).

Most UK homes use a single-phase supply, limiting charging speed to 7.4 kW — around 26 miles of range per hour.

⚡ Need Full-Speed Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Supports your Fiat’s full 11 kW AC charge rate on 3-phase supplies
• ✅ Ideal for public charging and homes with 3-phase power
• ✅ Works with single-phase chargers too (auto-adjusts)
• ✅ Future-ready if you change vehicles

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Fiat at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Best suited for single-phase wall boxes commonly found in UK homes
• ✅ Delivers up to 7.4 kW — ideal for overnight charging
• ✅ Lightweight, easy to handle, and reliable

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box? Use a Portable Charger

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — adjustable power from 10A to 32A
• ✅ A flexible and cost-effective alternative to fixed installations
• ⚠️ Will charge at single-phase speed

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Portable Backup Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Provides ~8 miles of range per hour
• ✅ Perfect for occasional use, low-mileage drivers, or travel
• ✅ Simply plugs into any standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

We offer a range of lengths to suit your Fiat charging needs:

• 3 m: Shortest option — great for tight setups
• 5 m: Most popular length for home and public use
• 7.5 m: Adds flexibility if your charge port isn’t always close
• 10 m: For wide driveways or varying parking positions
• 15–20 m: Ideal for shared parking spaces or commercial setups

📈 Charging Summary

*Based on Fiat EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Fiat-compatible cables are IP65-rated during use; IP55 when disconnected
• Portable chargers feature IP67-rated control units
• ✅ Suitable for outdoor use across all UK weather conditions
• ✅ Backed by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Fiat based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Firefly EVs (11kW AC Onboard Charger)

Firefly electric vehicles — such as the Firefly — are equipped with a Type 2 charging port and support 11 kW AC charging. This guide helps you choose the right EV charging cable based on your home setup, public charging habits, and portability needs.

⚙️ Understanding Firefly’s 11kW AC Charging

Firefly EVs with an 11 kW onboard AC charger can charge at full speed when connected to a 3-phase 16A AC supply — adding up to ~38 miles of range per hour (based on 3.5 miles/kWh).

At home, UK drivers typically use single-phase 7.4 kW chargers, which add around ~26 miles per hour.

⚡ Public or 3-Phase Charging at Full Speed

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Unlocks full 11 kW charging speed at 3-phase or public chargers
• ✅ Fully compatible with Firefly models using Type 2 ports
• ✅ Also works on single-phase chargers at reduced speed
• ✅ A smart choice for road trips and future vehicle upgrades

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for standard UK single-phase wall boxes
• ✅ Delivers up to 7.4 kW — great for overnight charging
• ✅ Durable, compact, and easy to use

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Charging Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A blue commando socket — adjustable from 10A to 32A
• ✅ Great for garages, outbuildings, or where wall boxes aren’t feasible
• ⚠️ Limited to single-phase power — up to 7.4 kW

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Travel or Backup Charger?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Plugs into any UK 3-pin socket — no installation needed
• ✅ Adds ~8 miles per hour — ideal for emergencies or travel
• ✅ Recommended for occasional or overnight use

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Firefly Cable Length Guide

Pick a cable length based on your parking arrangement and charging habits:

• 3 m: Best for wall-mounted chargers in small garages
• 5 m: Most common choice for home or public use
• 7.5 m: Extra reach for off-centre charge ports
• 10 m: Great for shared spaces or long driveways
• 15–20 m: Ideal for remote chargers or commercial needs

📈 Charging Summary

*Based on average Firefly EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Firefly-compatible cables are IP65-rated during use; IP55 when unplugged
• Portable chargers include IP67-rated control units
• ✅ Built for UK weather — rain, snow, and dust resistant
• ✅ 24-month warranty on all cables (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Firefly based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Ford EVs (11kW AC Onboard Charger)

Ford electric vehicles — including models such as the Mustang Mach-E — feature an 11 kW AC onboard charger. This allows for efficient home and public AC charging when paired with the right cable. This guide helps you select the best charging solution based on your Ford EV setup, whether you're at home, using public chargers, or planning for the future.

⚙️ Understanding Ford’s 11kW Charging Capability

To access full 11 kW charging speeds, your Ford must be connected to a 3-phase 16A AC power supply. This setup delivers up to ~38 miles of range per hour (based on 3.5 miles per kWh).

On a typical UK single-phase home supply, your EV will charge at 7.4 kW, which adds around 26 miles of range per hour.

⚡ Want the Fastest Charging for Your Ford?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Delivers full-speed 11 kW charging on 3-phase charge points
• ✅ Ideal for public charging stations and 3-phase home setups
• ✅ Also works on single-phase supplies at reduced speeds
• ✅ Future-proofed if you change vehicle later

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Ford at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Perfect for homes with single-phase wall box installations
• ✅ Delivers up to 7.4 kW — suitable for overnight top-ups
• ✅ Compact and easy to handle

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Flexible Charging Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — adjustable output from 10A to 32A
• ✅ A great solution if you don’t want to install a wall box
• ⚠️ Will charge at single-phase speed only (max 7.4 kW)

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup Charging Option?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds around 8 miles of range per hour
• ✅ Ideal for emergency use, low-mileage drivers, or travel
• ✅ No installation — plug into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

We offer a range of cable lengths to suit your Ford charging environment:

• 3 m: Perfect for tight, wall-mounted installations
• 5 m: Most popular choice for home and public use
• 7.5 m: Great for angled parking or wider bays
• 10 m: Ideal for longer driveways or less predictable setups
• 15–20 m: Best for commercial use or shared parking areas

📈 Charging Summary

*Based on typical Ford EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Ford-compatible cables are IP65-rated while in use; IP55 when disconnected
• Portable chargers include IP67-rated control units
• ✅ Built for year-round UK weather
• ✅ Covered by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Ford based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Geely EVs (11kW AC Onboard Charger)

Many electric models from Geely — such as the EX5 — are available with an optional 11 kW AC onboard charger. If your Geely EV includes this upgrade, you can benefit from faster AC charging at home and on public charge points.

⚙️ Understanding Geely’s 11kW AC Charging

To achieve the full 11 kW charging speed, your Geely must be connected to a 3-phase 16A AC supply. This setup can deliver approximately 38 miles of range per hour (based on 3.5 miles/kWh efficiency).

Most homes in the UK use single-phase power, which will limit charging to 7.4 kW — around 26 miles of range per hour.

⚡ Want Full-Speed Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Enables full 11 kW AC charging on 3-phase public or commercial chargers
• ✅ Compatible with all Geely EVs that support 3-phase
• ✅ Works with single-phase chargers too (reduced speed)
• ✅ Future-ready for your next EV

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging at Home on Single-Phase?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Best option for standard UK home wall boxes
• ✅ Delivers up to 7.4 kW charging speed
• ✅ Lightweight and easy to use daily

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Charging Option?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Plugs into a 32A blue commando socket — adjustable current settings (10A to 32A)
• ✅ Great for garages, workshops, or flexible installs
• ⚠️ Limited to single-phase charging

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Backup Charger?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds around 8 miles of range per hour
• ✅ Plugs into any standard UK socket
• ✅ Useful for emergencies, travel, or low-mileage use

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Geely EV Cable Length Guide

Choose a cable length that suits your parking layout and charging habits:

• 3 m: Ideal for wall boxes mounted beside the car
• 5 m: Most popular and flexible option for everyday use
• 7.5 m: Offers more flexibility for varied parking
• 10 m: Works well for longer driveways or awkward spaces
• 15–20 m: For public charge bays, shared setups, or fleet use

📈 Charging Summary

*Based on Geely EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Geely-compatible cables are IP65-rated while in use; IP55 when unplugged
• Portable chargers include IP67-rated control units
• ✅ Designed for UK weather and everyday use
• ✅ Covered by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Geely based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Genesis EVs (11kW AC Onboard Charger)

Genesis electric vehicles — including models such as the GV60, Electrified GV70, and G80 Electrified — are equipped with an 11 kW AC onboard charger. This guide helps you choose the ideal cable to match your charging routine, whether at home, at work, or on public chargers.

⚙️ Understanding Genesis’s 11kW Charging Capability

Genesis EVs with an 11 kW AC onboard charger reach full speed when connected to a 3-phase 16A power supply, delivering up to ~38 miles of range per hour (based on 3.5 miles per kWh).

If you're using a single-phase wall box at home, charging is capped at 7.4 kW, adding around 26 miles of range per hour.

⚡ Unlock Full-Speed Charging

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Supports full 11 kW charging for Genesis EVs on public or 3-phase home supplies
• ✅ Works on single-phase charge points at reduced speed
• ✅ Future-proofed if you upgrade vehicles

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Genesis at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Ideal for UK homes with single-phase wall box installations
• ✅ Delivers 7.4 kW charging speed for overnight top-ups
• ✅ Lightweight and reliable for daily use

🔗 Shop Single-Phase Type 2 Cables

🔧 Don’t Have a Wall Box Installed?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Connects to a 32A commando socket — adjustable output (10A to 32A)
• ✅ Portable and cost-effective alternative to fixed installations
• ⚠️ Charges at single-phase speed (up to 7.4 kW)

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Travel or Backup Charger?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour
• ✅ Perfect for emergency use, travel, or low-mileage days
• ✅ No installation required — plug into any UK 3-pin socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Should You Choose?

We stock multiple lengths to suit different charging environments:

• 3 m: Ideal for tight charging bays or wall boxes close to the charge port
• 5 m: Most popular length — suitable for most home and public charging
• 7.5 m: Adds flexibility for side- or rear-mounted charge ports
• 10 m: Great for longer driveways or awkward setups
• 15–20 m: Designed for shared spaces, business fleets or car parks

📈 Charging Summary

*Based on average Genesis EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Genesis-compatible cables are IP65-rated during charging; IP55 when unplugged
• Portable chargers include IP67-rated control units
• ✅ Designed for UK weather conditions
• ✅ 24-month warranty included (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Genesis based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for GWM EVs (11kW AC Onboard Charger)

GWM electric vehicles, such as the GWM Ora Funky Cat, are equipped with an 11 kW AC onboard charger. This allows your EV to charge at high speed when connected to a suitable 3-phase supply — and efficiently at home on single-phase setups. This guide helps you choose the right cable for your needs, whether you’re charging at home, on the road, or preparing for your next EV.

⚙️ Understanding GWM’s 11kW Charging Capability

Your GWM EV can charge at up to 11 kW when connected to a 3-phase 16A AC supply, delivering around 38 miles of range per hour (based on 3.5 miles per kWh). At home, most drivers will be using a single-phase 7.4 kW wall box, which charges at a slower but still practical rate of around 26 miles per hour.

⚡ Want Full-Speed Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Enables full 11 kW AC charging for GWM EVs on 3-phase supply
• ✅ Fully compatible with public and 3-phase home charge points
• ✅ Works on single-phase too (auto-limited to 7.4 kW)
• ✅ Ideal if you plan to upgrade vehicles in the future

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your GWM at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Best choice for single-phase UK wall boxes
• ✅ Delivers up to 7.4 kW — suitable for overnight or daytime top-ups
• ✅ Compact and easy to store

🔗 Shop Single-Phase Type 2 Cables

🔧 Prefer a Portable Setup?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Plugs into a 32A commando socket — adjustable output from 10A to 32A
• ✅ Perfect for garages or semi-permanent charging setups
• ⚠️ Will charge your GWM at single-phase speed only

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Need a Travel or Backup Charger?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds ~8 miles of range per hour of charging
• ✅ Ideal for use when visiting friends, holiday accommodation or backup use
• ✅ No installation required — plugs into any UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 Choosing the Right Cable Length

Choose your length based on where and how you park:

• 3 m: Ideal for fixed wall boxes near the car’s port
• 5 m: Most popular — works well at home or in public bays
• 7.5 m: Adds flexibility when parking direction varies
• 10 m: Useful for wide or shared driveways
• 15–20 m: Designed for commercial setups or extended reach

📈 Charging Summary

*Based on GWM EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All GWM-compatible cables are IP65-rated while charging; IP55 when disconnected
• Portable chargers include IP67-rated control units
• ✅ Built for UK and European weather conditions
• ✅ Covered by a 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your GWM EV based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Honda EVs (11kW AC Onboard Charger)

Honda electric vehicles such as the Honda e:Ny1 are equipped with an 11 kW AC onboard charger. This guide helps you select the most suitable cable to get the best out of your Honda — whether you’re charging at home, on the move, or preparing for a future EV upgrade.

⚙️ Understanding Honda’s 11kW Charging Capability

To charge at the full 11 kW speed, your Honda EV needs to be connected to a 3-phase 16A AC supply. This delivers around 38 miles of range per hour (based on 3.5 miles per kWh).

If you're charging at home on a typical single-phase supply, the charge rate will be limited to 7.4 kW, adding approximately 26 miles per hour.

⚡ Want Full-Speed Charging?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Supports full 11 kW charging on 3-phase supplies
• ✅ Perfect for public charging points or 3-phase home chargers
• ✅ Works on single-phase too (auto-limits to 7.4 kW)
• ✅ Future-proof for next-generation EVs

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Honda at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Ideal for UK homes with standard single-phase wall boxes
• ✅ Delivers up to 7.4 kW — perfect for overnight charging
• ✅ Easy to handle and store

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box at Home?

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Plugs into a 32A commando socket — adjustable from 10A to 32A
• ✅ Portable solution for those who don’t want a fixed installation
• ⚠️ Limited to single-phase charging speed

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Travelling or Need a Backup?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds around 8 miles of range per hour
• ✅ Handy for overnight charging or when visiting friends and family
• ✅ Plugs into any standard UK socket — no install needed

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Do You Need?

Choose a length based on your parking setup and usage:

• 3 m: Best for very short distances between charge point and port
• 5 m: Most popular — flexible and compact for daily use
• 7.5 m: Helpful if you reverse in or park in tight spaces
• 10 m: Useful for larger driveways or unpredictable layouts
• 15–20 m: Ideal for commercial spaces or fleet parking

📈 Charging Summary

*Based on Honda EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Honda-compatible cables are IP65-rated during use; IP55 when unplugged
• Portable chargers feature IP67-rated control boxes
• ✅ Made for year-round use in UK and European weather
• ✅ Backed by a 24-month warranty (excludes accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Honda based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Hongqi EVs (11kW AC Onboard Charger)

Hongqi electric vehicles — such as the Hongqi E-HS9 — are fitted with an 11 kW AC onboard charger. This enables fast and efficient charging at public AC chargers and 3-phase home setups. The guide below will help you select the ideal cable for your Hongqi, whether charging at home, on the road, or planning for future needs.

⚙️ Understanding Hongqi’s 11kW Charging Capability

To unlock full-speed charging, your Hongqi must be connected to a 3-phase 16A AC power supply. This setup provides up to 38 miles of range per hour (based on 3.5 miles per kWh).

For most UK homes using a single-phase supply, charging is capped at 7.4 kW, which adds approximately 26 miles of range per hour.

⚡ Want the Fastest Charging Experience?

⚡ 32A 3-Phase Type 2 to Type 2 Charging Cable (22kW Rated)

• Delivers full 11 kW charging speed on 3-phase supply
• ✅ Ideal for public charging stations and 3-phase home setups
• ✅ Also works with single-phase chargers (auto-limited)
• ✅ Future-proof choice for faster EVs down the line

🔗 Shop 3-Phase Type 2 Cables

🏡 Charging Your Hongqi at Home?

🔌 32A Single-Phase Type 2 to Type 2 Charging Cable (7.4kW)

• Designed for UK homes with single-phase wall boxes
• ✅ Charges your Hongqi at up to 7.4 kW
• ✅ Lightweight, durable, and easy to handle

🔗 Shop Single-Phase Type 2 Cables

🔧 No Wall Box? Go Portable

🔌 32A Portable Charger with CEE Plug (Up to 7.4kW)

• Plugs into a 32A commando socket — adjustable from 10A to 32A
• ✅ Great alternative to installing a fixed wall box
• ⚠️ Charges at single-phase speed only

🔗 Shop 16A Portable EV Chargers with CEE Plug

🧳 Travelling or Need a Backup?

🔌 10A Portable EV Charger with UK 3-Pin Plug (2.3kW)

• Adds approximately 8 miles of range per hour
• ✅ Useful for overnight top-ups or emergency use
• ✅ No installation required — just plug into a standard UK socket

🔗 Shop 10A 3-Pin Portable EV Chargers

📏 What Cable Length Should You Choose?

Choose the right length based on your parking and charging environment:

• 3 m: Ideal for wall boxes close to your charge port
• 5 m: Best for everyday use — home or public charging
• 7.5 m: Offers more flexibility with cable routing
• 10 m: Good for wide driveways or longer bays
• 15–20 m: Suited to commercial setups or shared spaces

📈 Charging Summary

*Based on Hongqi EV efficiency of 3.5 miles per kWh.

🛡️ Safety & Warranty

• All Hongqi-compatible cables are IP65-rated while in use; IP55 when disconnected
• Portable chargers include IP67-rated control units
• ✅ Designed for UK weather — rain, frost, and sunshine
• ✅ 24-month warranty (excluding accessories)

🧠 Quick Cable Picker

💬 Need Help?

Use our EV Charging Calculator to see how long each cable will take to charge your Hongqi based on your setup.

Still unsure? Contact our team for expert advice — we’re here to help.

⚠️ Note: This guide covers AC charging only. DC rapid chargers (e.g. motorway services) use permanently attached cables and do not require or support portable or replaceable charging cables for typical EV use.

🔌 EV Charging Cable Guide for Hyundai EVs (11kW AC Onboard Charger)

Hyundai electric vehicles — including the IONIQ 5, IONIQ 6, Kona Electric, and IONIQ Electric — are equipped with an 11 kW AC onboard charger. This guide will help you choose the most suitable charging cable for your Hyundai based on where you charge, how often, and your future plans.

⚙️ Understanding Hyundai’s 11kW Charging Capability

Your Hyundai EV can charge at up to 11 kW on a 3-phase 16A AC supply, delivering roughly 38 miles of range per hour (based on 3.5 miles per kWh).

When charging at home on a standard UK single-phase wall box, the rate is limited to 7.4 kW, which equates to around 26 miles of range per hour.